It's that time of year again. As temperatures drop, take a moment to review this previously posted article packed with cold-weather tips.

There are plenty of leak seal jobs that need to be done in the winter. So let's take a look at those cold-weather markets. We'll also review some special considerations for conditioning leak seal material and equipment. Then we’ll leave you with a few cold temperature leak seal application tips.

Cold Weather Markets

You have a variety of options for seeking jobs that are inside, out of the elements, during the winter months.  Hopefully, these ideas will spark more brainstorming on your part. First up we have tunnels, both pedestrian and vehicle. Tunnels often leak, sometimes significantly enough to result in quite a big job. Aquariums are another possibility. As you can imagine, there are infinite potential leak problems in a structure holding that much water. Other possible large jobs could include mines and water treatment plants (which have plenty of interior spaces with potential leak issues). On the smaller side, there are utility vaults, lift stations, manholes, and elevator pits.

If you’re still up for working outside during the winter months, you’re in luck because concrete contracts during colder weather. The contraction makes cracks open wider. Wider cracks make leaks more apparent to the property owner and make them easier to repair.

Conditioning Materials and Equipment

One important point to understand is that cold weather requires you to make an extra effort to keep your materials and equipment warm. Cold material reacts slower and gets thicker. Be sure to store your materials and equipment in a heated room the night before the job. When on the job site, there are many ways to keep everything warm. Use an enclosed vehicle, like a box truck, enclosed trailer, or pickup truck with a camper top or bed cover. Keep as much material and equipment inside the vehicle as possible when working. Use a portable heater to maintain a warm temperature. You can also use electric pail heaters to keep your resin ready for action.

Remember that it won’t do you any good to heat the resin if you’re pumping it through cold equipment. The cold steel inside the pump and the cold hose will literally suck the heat out of the resin before it gets where it needs to be. This will increase the viscosity, making it harder to mix with the water and it will slow down the reaction dramatically. So don’t neglect the equipment side of the equation!

Cold Temperature Application Tips

If you’re using a product with an accelerator, you may need to use a faster accelerator or increase your percentage. Also, bring lots of oakum. You may have to use more if the cold temperature slows down the material or the contracted concrete has made the cracks wider.

If your job requires you to inject into a structure underwater (and the water’s cold), you can use a technique called twin streaming. In this approach, you hook two valves together in a parallel fashion – then inject warm water along with the resin to kick start it reacting before hitting the cold water.

Conclusion

I hope this overview has helped spark some ideas on your part for finding leak seal work during the winter months. Just remember to keep your materials and equipment conditioned and you should be fine. Have more questions about polyurethane leak seal in cold weather? Call us at 404-618-0438.

Want more in-depth info on polyurethane leak sealing?

It's that time of year again. As temperatures drop, take a moment to review this previously posted article packed with cold-weather tips.

Contrary to popular opinion, as a contractor, you don’t have to put up your equipment and rigs due to cold weather. There are many jobs to be done and many ways to keep your material conditioned. Use this season to your advantage and gain valuable business.

Cold Weather Markets

Seasonal attractions such as theme parks are a great place to start looking for winter work. Many of these parks (the ones that aren’t in Orlando) shut down for the winter and this is the time they do maintenance and repairs. Think of all the concrete lifting and leveling that can be done.

Factories can be less active in the winter months with production slowing down in many industries. This is a good time for them to do maintenance and floor repairs as well.

Warehouses typically operate year-round, so there is always work available. Warehouse floors are used and abused on a daily basis and will sooner or later need some form of repairs done to keep business running at a steady pace. In addition, many warehouses have dangerous voids beneath their floors that require repair.  

Exterior concrete slabs are still worth considering, even in the cold weather. These slabs experience the most wear and tear from the environment itself (think erosion) and daily traffic. You’ll need to lift concrete slabs before the ground freezes and only after your materials have been thoroughly conditioned.

Conditioning Materials

Your slab lifting equipment probably has built-in heaters and a heated hose. Each brand and model of pump has different sized pre-heaters and different ∆T (∆ = Delta and T = Temperature). This sounds complicated but is actually quite simple.  ∆T is simply the change in temperature.  Let’s say your material has been sitting in a cold trailer all night and the temperature has dropped to 40 degrees F. If the required temperature of your B side material is 120 degrees F, then your pump better be rated with a ∆T of at least 80 degrees. However, if your material is preconditioned to 70 degrees F, then your machine only has to be rated for a ∆T of 50 degrees. As I said, every machine is rated differently based on the size of the heaters. What is important to know is that there are limitations to how much heating your machine can do.

Keeping your materials conditioned in the winter months is a lot easier than it sounds. The main point is to keep your AP Lift products above 60 degrees at all times. Keeping the polyurethane at or above that temperature can be accomplished in a number of ways.

If you have an insulated rig, it should stay around 40 degrees warmer than outside temperatures. Most foam rigs have built-in electric heaters that require an extension cord to a power outlet at the job site or at your facility for overnight storage. Alternately, you could buy an electric radiator heater. Other available heating devices include drum band heaters and heated drum mats (be careful not to scorch the polymers by turning band heaters up too high). For a more DIY approach, you could build a hot box around the material storage area in your rig.

Heat Sink

Another consideration when lifting cold slabs is the heat sink factor. AP Lift products come out of the gun hot and get even hotter as they react. However, cold concrete acts as a heat sink and sucks the energy out of the foam as it starts to react. This can slow down the reaction speed of the foam. If you are pumping into a void, it will have little effect because most of the foam is not in contact with the concrete. If you are trying to lift a slab with little void, it will have more of an effect because more of the foam is in contact with the cold concrete and cold soil. More volume = more energy.

Conclusion

Don’t let common preconceptions deter you from slab lifting in cold weather. As noted above, there is no need to shut down completely for the upcoming winter months if you don’t want to. Opportunities still exist and one of them may just be the job you’ve been looking for all year. There are many ways to keep your equipment and materials conditioned to efficiently work in lower temperatures. Have more questions about slab lifting in cold weather? Call us at 404-618-0438.

Want more in-depth info on slab lifting?

The Alchemy-Spetec app now includes a Leak Seal Material Selection Guide, along with the Polyurethane Estimating Calculator.  The Leak Seal Product Selection guide asks you a series of Yes/No questions about your job and then provides product recommendations.  The Polyurethane Estimating Calculator takes the guesswork out of estimating material for Leak Seal, Geotech, and Floor Repair jobs. Here's a step-by-step guide...

Download the Alchemy-Spetec App & Create an Account

1. Download the app.
Search Alchemy-Spetec in your Apple App Store or Google Play Store to install the app.

2. Create an account.
After installing the app, create an account by clicking "Sign Up" at the bottom and following the prompts.

Select a Leak Seal Product for Your Job

1. Tap the three lines in the top left corner to display the application options.  Choose Leak Seal Material Selection Guide.

2. Answer a series of Yes/No questions about your leak seal job.

3. Review the product recommendation screen (and/or click the Start Over button at the bottom to begin again). Call the Alchemy-Spetec support squad at 404-618-0438 for more guidance specific to your project.

NOTE: You can also access the Leak Seal Material Selection Guide via this red button in the top right corner of our website home page...

Estimate Material for Your Leak Seal, Geotech, or Floor Repair Job

1. Tap the three lines in the top left corner to display the application options. Choose Material Estimation Calculator, then choose Geotech (Slab Lifting & Void Fill), Leak Seal, or Floor Repair for your job type.

2. Select the measuring system you want to use.

3. The Slab Lifting calculator appears by default. You can switch to the Void Filling calculator by clicking the button at the bottom right. Choose your product and fill in the square feet of your slab, plus the inches it has settled (or inches of void if using the Void Filling calculator).

4. View the recommended material quantities. Call the Alchemy-Spetec support squad at 404-618-0438 for more guidance specific to your project.

Want more information on Alchemy-Spetec products?

SOLD OUT!

Alchemy-Spetec HQ in Tucker, GA
Registration Deadline: Tuesday, October 12th

$695 Registration Fee
$615 for each additional participant from
the same company.

Get ready for a thorough education in Slab Lifting, Soil Stabilization, the Alchemy-Spetec Deep Lift® process, equipment, and applications. You’ll get hands-on training from a technical staff with decades of on-the-job experience.

Tuesday, October 26th

• Geotech Product Line Overview
• Geotech Applications & Case Studies
• PolyBadger® Demo & Training
• Estimating & Quoting Jobs

Wednesday, October 27th

• PMC Pump Demo & Training
• Leak Seal Issues on Geotech Jobs
• Ground Penetrating Radar Demo & Training
• Slab Lift Rig Demo & Training
• Competing Geotech Techniques

Thursday, October 28th

• PolyShark® / Soil Stabilization Demo & Training (On-Site)
• Deep Lift® Demo & Training (On-Site)

Your Instructors:

Andy Powell (Southeastern Regional Manager), Erik Prinzing (Midwest Regional Manager), Colt Hullander (Director of Technical Services - Geotech), Patrick Zito (Eastern Regional Manager), Joel Bryant (Western Regional Manager).

SOLD OUT!

Alchemy-Spetec HQ in Tucker, GA
Registration Deadline: Tuesday, October 12th

$695 Registration Fee
$615 for each additional participant from
the same company.

Get ready for a thorough education in Slab Lifting, Soil Stabilization, the Alchemy-Spetec Deep Lift® process, equipment, and applications. You’ll get hands-on training from a technical staff with decades of on-the-job experience.

Tuesday, October 26th

• Geotech Product Line Overview
• Geotech Applications & Case Studies
• PolyBadger® Demo & Training
• Estimating & Quoting Jobs

Wednesday, October 27th

• PMC Pump Demo & Training
• Leak Seal Issues on Geotech Jobs
• Ground Penetrating Radar Demo & Training
• Slab Lift Rig Demo & Training
• Competing Geotech Techniques

Thursday, October 28th

• PolyShark® / Soil Stabilization Demo & Training (On-Site)
• Deep Lift® Demo & Training (On-Site)

Your Instructors:

Andy Powell (Southeastern Regional Manager), Erik Prinzing (Midwest Regional Manager), Colt Hullander (Director of Technical Services - Geotech), Patrick Zito (Eastern Regional Manager), Joel Bryant (Western Regional Manager).

I think you’ll agree with me when I say that, as a slab lifting contractor, you can never have too many leads. While there may be dozens of methods available, there are three very effective resources our customers strategically use to land new slab lifting projects on a regular basis. Let’s get started.

HomeAdvisor

HomeAdvisor can be a lead machine for residential slab lifting contractors. HomeAdvisor's online and TV marketing efforts draw in homeowners looking for local contractors of all kinds. You pay a membership fee, set a lead budget, and they feed you concrete leveling opportunities. But it doesn’t stop there. Here are some tips that can help you capitalize on those leads:

1. Call the homeowner immediately: These leads go to multiple contractors so you need to be among the first to book an appointment.
2. Pick specific zip codes: You can call HomeAdvisor and limit your advertising to higher-income zip codes, zip codes closest to your business, etc. Take some time to think through the reasons for targeting specific areas. For example, higher-income homeowners tend to care more about quality than price, jobs near your business reduce travel costs, and so on.
3. Dispute bad leads: Some leads will come in that aren’t relevant. For example, the homeowner didn't realize they were choosing the wrong job type category, or they just wanted to ask some questions but did not actually have a project available. You can dispute these types of leads via HomeAdvisor's website or by calling their customer service line.

Google Ads

Google is the most popular search engine in the world. Our top customers have learned to leverage Google's massive user base through implementing strategic Google Ads campaigns. They use Google Ads to target local people who are searching for specific keywords such as "concrete leveling contractor near me" or "sinking driveway repair", etc. This means you can continually refine your parameters so that the most relevant leads end up on your landing page. 

It's important to design a custom landing page for your Google Ads campaign, encouraging the visitor to download a brochure for more information. Your brochure download process should require the lead to enter their contact info. Some people recommend excluding website navigation menus on these pages, effectively requiring the visitor to download the brochure. In this way, you capture contact info from all types of visitors - even those who are not ready to buy yet but are in the information gathering stage. These types of visitors would otherwise scour a conventional website, take notes, and then continue searching without ever sharing their contact info.  If you need someone to create your Google Ads campaign and/or landing page, we can put you in contact with experienced freelancers.

This next section is excerpted from our brochure, Marketing Your Contracting Business. (The brochure download link is at the bottom of this article.)

Blogging for Leads

Cast a Wide Net with a Lot of Posts

The more pages you have on your website, the more chances there are for someone to find it when searching a specific phrase or term. Search engines are scanning your page names, heading text, and page text when someone types in a term or phrase to see if there are any matches. So, it’s in your best interest to have as many pages full of relevant content as you can. A blog is a perfect way to accomplish that goal.

Say, for example, that you are a slab lifting contractor in San Pedro, California. You can write up case studies of jobs you’ve performed in your area. Make sure your blog titles include terms people will likely search for. For example, a post about a warehouse floor job could be titled, “Warehouse Floor Slab Lift in San Pedro”. You get the idea.

Share Your Knowledge and Build Trust

You can also use a blog as a way to share your knowledge and experience with potential customers who are looking for answers. Take some time to consider all that you’ve learned over the years and jot down ideas for blog posts that potential customers may find helpful. In addition to case studies, you can write posts instructing people how to spot problems on their property, comparing your repair costs to the costs of replacing a structure, educating people about the materials you use, etc.

You can get quite a few ideas by browsing the posts on our blog. While our articles are aimed more at contractors than property owners, you’ll still find many useful subjects to get your brainstorming started. The more useful knowledge you share, the more trust you can build with potential customers. People are much more likely to buy a service from a known expert than from a complete stranger.

Offer More Value in Exchange for Contact Info

Driving up web traffic is a good thing. Establishing yourself as an authority by creating useful content is also very helpful. If you just do those two things, you should get more people calling you and filling out the contact form on your website. But if you REALLY want to jumpstart the leads, you need to offer something of value in exchange for your reader’s contact info. At the end of every article, include a link to a relevant brochure – or something else of value – and ask for their contact info in exchange. For an example, see the form download button at the bottom of this article.

The Gift That Keeps on Giving

The great thing about a blog post with a lead capture form at the end is that, once you set it up – it’s there forever. We still get leads from blog posts we put up years ago. If you consistently write articles, you can create a compounding effect with more and more leads coming in each month.

Want more information on lead generation?

A couple of recent judgments in slip and fall cases should concern any property owner with slip OR trip risks on the premises. 

On July 12, 2019, WTXL TV in Tallahassee posted an article on their website about a near 2 million dollar judgment for a slip and fall case at a local convenience store:

On Thursday, a Leon County jury ruled that Siraji Inc., the owner of the USA Grocers convenience store in the 2600 block of Roberts Avenue, was responsible for causing the 2016 slip and fall of 47-year-old Stephanie Jenkins. Jenkins was awarded $1.9 million for the permanent and severe injuries she sustained.

On January 8, 2021, Daily Report posted an article about a 1 million dollar judgment in an Atlanta slip and fall case:

Nearly a year after a judge awarded a woman injured in a slip-and-fall accident at an Atlanta restaurant more than $1.1 million in damages, the parties have settled for just over $1 million.

These are record judgments against property owners for these types of accidents. If you have a trip and fall litigation risk on your site, contact us for a qualified slab lifting contractor referral today!

Want more information on leveling concrete slabs?

Alchemy-Spetec is pleased to announce the opening of a Western region manufacturing facility and grout lab in Reno, Nevada. Leak Seal and Geotech products are both currently stocked at this new location. Customers in the Western states will benefit from faster shipments. Alchemy-Spetec’s industry-leading tech support team will offer training programs and grout labs at the Reno location in the near future.

Vice President of Sales & Marketing Brian Oeder explains, “This effort is part of an ongoing commitment to providing easily accessible infrastructure repair products and technical training to contractors from coast to coast. We’re acutely aware of the tight deadlines our customers often face and we’re laser-focused on making sure our products and support expertise are always available.” President & CEO Stephen C. Barton adds, “Our new Reno facility is the latest step in our growth strategy. Serving customers on the West Coast by reducing transit time is our primary driver. We now have a one or two-day shipping point to the entire West Coast.”

For more information, contact:
Brian Oeder
VP Sales & Marketing
513-473-0062
boeder@alchemy-spetec.com

Want more information on Alchemy-Spetec products?

In this post, I provide an overview of a series of articles I wrote in 2018 on the basics of starting up a slab lifting business.

Subjects Covered in This Series

In this blog post series, we address some of the key points and considerations that slab-lifting startups frequently face. With so many years of market experience, we are uniquely positioned and qualified to offer this guidance. Because we are passionate about what we do, we are motivated to be part of your success story! Some of the topics we will cover include:

• Key Considerations
• Identifying your target market
• Selling to your potential customers
• Marketing your business
• Essential gear & accessories for starting your business

So You’re Thinking About Starting a Slab Lifting Company: Key Considerations

Slab lifting is an economical alternative to complete concrete replacement, be it a simple sidewalk repair or providing a cost-effective remedy for an entire building foundation.

If someone asked you to drive to Seattle, would you get in your car and take off, or would you look at a map first? A business and marketing plan is the roadmap for your slab lifting/concrete leveling business. It will help you define and stay true to your path, and it’s a tool you will need to attain startup financing.

Whether your goal is to launch a slab lifting venture that caters to home or business owners, you also will need a dependable, knowledgeable supplier who will not only sell you slab lifting pumps, guns and foams - but also serve as a trusted advisor.
Click here to read more...

Slab Lifting Market Hot Zones

Once you’re ready to make the move to start up a slab lifting business, one of your first areas of focus should be identifying and defining your service areas and your potential customer base within each sector or area. Broadly speaking, there are three viable market segments to explore for slab lifting services: Residential, Commercial, and Municipal.
Click here to read more...

Selling the Customer: Why Polyurethane Slab Lifting Is the Better Choice

The first question any engineer will ask is “Does the solution fit the needs of the application?” When it comes to structural foams used for slab lifting repair projects, you can confidently answer “yes.” But if you want to guide your customer to a concrete leveling repair solution, you should also be able to illustrate the pros, explain the cons, and enunciate the selling points.
Click here to read more...

Marketing Your Slab Lifting Business

Marketing your new slab lifting business takes time and the right approach. If your slab lifting business is a small to medium-sized operation, tools and strategies that increase your market presence and help you attract leads are extremely important.
Click here to read more...

Essential Gear for Starting Your Next Generation Slab Lifting Business

Slab lifting with polymers is rapidly replacing old technologies because it’s fast, strong, doesn’t shrink, and has a low impact on the environment. So it’s no surprise that we get a lot of inquiries from contractors interested in adding this service, in addition to individuals wanting to create a startup slab lifting business. So what exactly are we talking about in terms of the essential gear?

A slab lifting rig is a rolling business unto itself. It is a self-contained, turnkey, mobile unit that has all of the equipment necessary to perform the work. There are a variety of configurations but all of these setups will contain the following: Trailer or Box Truck, Power Source, Compressed Air System, Fluid Transfer System, Proportioner Pump, Heated Hoses, and Impingement Gun. Let’s look at these in more detail.
Click here to read more...

Want more information on Alchemy-Spetec geotech products and equipment?

This article is an excerpt from Episode 12 of Alchemy-Spetec's podcast The Injection Connection, featuring Outside Sales Representative at All-Tex Supply, Inc. Josh Van Hook. Josh has over 18 years of experience as a distributor in Austin, TX and one of his passions has been chemical grouts. (If you'd rather view or listen, an audio/visual version of this excerpt is posted at the bottom of the article.)

Charlie Lerman: As manufacturers, we love to do all these demos and training sessions and all that kind of stuff. As a dealer, what do you see that seems to be most effective, that helps out your contractors the most, and that leads to more sales generation for you guys?

Josh Van Hook: In my eyes, as a distributor, we get paid to keep material on the shelf and keep stuff in stock. To me, that's probably the most important thing: being able to provide the product to the customer when it's needed. Unfortunately, chemical grouts are not something that most people have plenty of time to plan ahead for, and put together orders and wait for them to be shipped in. As a distributor, that’s what I’ve always focused on. One point I emphasize to the guys that have worked under me (and the guys that I’ve worked for have emphasized to me) is that you've got to have material to be able to sell it. That's the number one thing in my mind regarding a benefit that we can provide to the contractors. That and a little bit of knowledge.

Charlie: Exactly as I led off with at the beginning of our conversation, the three most important things - first off is it there? So, I remember when I was a contractor, we had a chemical grout company talk to us and it sounded great. We were all set, we're going to switch over to their products. And like, when do we get it? Like, you let us know and we'll ship it out to you, it’ll be there in three days. Like, okay, we're done here.

Josh: Yeah, that doesn't work. From our side of it, if we have it, we're going to sell it. That's the main thing.

View the video version of this excerpt...

Want some information on Alchemy-Spetec products?