Case Study - Lifting Sunken Steps at a Mixed-Use Complex

A concrete staircase in a prominent mixed-use complex in Atlanta needed urgent repairs due to a set of 75-foot-long sunken steps. This issue posed a significant trip hazard, potentially compromising visitor safety. The problem stemmed from a combination of factors working together over time. Water infiltration through expansion cracks had created voids beneath the stairs, weakening their foundation. Compounding this issue was the natural tendency of separate concrete pieces to expand and contract, moving independently. This movement was particularly problematic as it caused the steps to separate from the adjacent sidewalk. Over time, the repeated cycles of expansion and contraction, coupled with the underlying voids, led to the steps sinking and rolling, creating a hazardous situation. 

Local experts from Engineered Restorations were called in to tackle this tricky situation. The team faced the challenge of addressing safety concerns while preserving the structural integrity of the staircase.

Powerful Polymers

AP Lift 430 was selected as the repair material for this restoration project. This polyurethane foam has expansive properties that are suitable for lifting sunken structures. Once cured, AP Lift 430 provides support for long-term stability, aligning with the project's requirements.

Painless Procedures

The repair process began with an assessment of the trip hazard. This allowed the team to determine the extent of the problem and plan their approach. Next, backer rods between the steps and sidewalk were removed to prepare the area for treatment. Alchatek Surface Guard 125 was applied around the injection area to prevent any excess polyurethane from bonding to the concrete. Protective sheets were placed to shield nearby glass surfaces.

The team drilled holes through the 8-inch concrete steps to reach the underlying soil. Soil probes revealed firm underlying conditions. The team then implemented their injection strategy. They created an initial foam layer slowly, injecting it just once every ten seconds. This gradual approach prevented existing hairline cracks from expanding during the lifting process. The team continued to inject AP Fill 430 until the steps were level. Finally, they redrilled and applied a second injection layer beneath the first to fill any voids created in the process. New backer rods were then installed.

To enhance the longevity of the repair, the team took an additional crucial step. They sealed the expansion joints with silicone, creating an optimal water barrier. This silicone sealant is flexible, accommodating future expansion and contraction. This extra measure was designed to protect the structure from water infiltration and movement, addressing the root causes of the original problem. 

Rapid Results

In just four hours, the steps were restored to a level position, aligning with the adjacent walkway. This efficient repair method addressed the immediate safety issue while extending the structure's lifespan. By lifting the existing steps rather than replacing them, the property owner avoided substantial expenses associated with demolition, new materials, and extended labor time for a complete replacement. This approach ultimately provided significant cost savings.

Want more information on concrete leveling with polyurethane?